Opleidingen
68.968
resultaten
Designing Cisco Data Center Infrastructure (DCID)
Designing Cisco Data Center Infrastructure (DCID)
The Designing Cisco Data Center Infrastructure (DCID) v7.0 course helps you master design and deployment options focused on Cisco® data center solutions and technologies across network, compute, virtualization, storage area networks, automation, and security. You will learn design practices for the
Cisco Unified Computing System™ (Cisco UCS®) solution based on Cisco UCS B-Series and C-Series servers, Cisco UCS Manager, and Cisco Unified Fabric. You will also gain design experience with network management technologies including Cisco UCS Manager, Cisco Data Center Network Manager (DCNM), and Cisco UCS Director. You can expect theoretical content as well as design-oriented case studies in the form of activities.
This course helps you prepare to take the exam, Designing Cisco Data Center Infrastructure (300-610 DCID), which leads to the new CCNP® Data Center and Cisco Certified Specialist - Data Center Design certifications.
After taking this course, you will be able to:
- Describe the Layer 2 and Layer 3 forwarding options and protocols used in a data center
- Describe the rack design options, traffic patterns, and data center switching layer access, aggregation, and core
- Describe the Cisco Overlay Transport Virtualization (OTV) technology that is used to interconnect data centers
- Describe Locator/ID separation protocol
- Design a solution that uses Virtual Extensible LAN (VXLAN) for traffic forwarding
-...
- Network Designer
- Network Administrator
- Network Engineer
- Systems Engineer
- Consulting Systems Engineer
- Technical Solutions Architect
- Cisco Integrators/Partners
Describing High Availability on Layer 2
- Overview of Layer 2 High-Availability Mechanisms
- Virtual Port Channels
- Cisco FabricPath
- Virtual Port Channel+
Designing Layer 3 Connectivity
- First Hop Redundancy Protocols
- Improve Routing Protocol Performance and Security
- Enhance Layer 3 Scalability and Robustness
Designing Data Center Topologies
- Data Center Traffic Flows
- Cabling Challenges
- Access Layer
- Aggregation Layer
- Core Layer
- Spine-and-Leaf Topology
-...
€3.495
Klassikaal
5 dagen
Troubleshooting Cisco Data Center Infrastructure (DCIT)
The Troubleshooting Cisco Data Center Infrastructure (DCIT) training builds your knowledge and skills in troubleshooting LANs, SANs, Cisco Unified Fabric, Cisco Unified Computing System (Cisco UCS)...
The Troubleshooting Cisco Data Center Infrastructure (DCIT) training builds your knowledge and skills in troubleshooting LANs, SANs, Cisco Unified Fabric, Cisco Unified Computing System (Cisco UCS), and Cisco Application-Centric Infrastructure (Cisco ACI). You’ll gain hands-on experience resolving problems on Cisco Multilayer Director Switch (MDS) switches, Cisco Nexus switches, Cisco Fabric Extenders (FEXs), Cisco UCS, Cisco ACI, and more. This training also earns you 50 Continuing Education (CE) credits towards recertification.
This training helps prepare you to take the exam:
- 300-615 Troubleshooting Cisco Data Center Infrastructure (DCIT)
How You'll Benefit
This training will help you:
- Learn how to deploy and troubleshoot various components of Cisco data center infrastructure to support performance, resiliency, scalability needs
- Gain knowledge and skills through Cisco’s unique combination of lessons and hands-on practice using enterprise-grade Cisco learning technologies, data center equipment, and software
- Qualify for professional-level job roles
- Describe how to troubleshoot the data center network
- Describe the troubleshooting tools and methodologies that are available from the Command-Line Interface (CLI) and are used to identify and resolve issues in a Cisco Data Center network architecture
- Identify and resolve issues that are related to Virtual LANs (VLANs) and private VLANs (PVLANs)
- Identify and resolve issues that are related to port channels and virtual port channels
- Identify and resolve issues that are related to VXLA...
- Network designers
- Network administrators
- Network engineers
- System engineers
- Consulting systems engineers
- Technical solutions architects
- Server administrators
- Network managers
- Cisco integrators and partners
- Section 1: Describing the Troubleshooting Process
- Section 2: Understanding CLI Troubleshooting Tools
- Section 3: Troubleshooting VLANs and PVLANs
- Section 4: Troubleshooting Port Channels and Virtual Port Channels
- Section 5: Troubleshooting VXLAN
- Section 6: Troubleshooting Routing and High-Availability Protocols
- Section 7: Troubleshooting Data Center LAN Security
- Section 8: Troubleshooting Platform-Specific Issues
- Section 9: Troubleshooting Fibre Channel Interfaces
- Section 1...
€3.495
Klassikaal
5 dagen
Junos Layer 3 VPNs (JL3V)
Junos Layer 3 VPNs (JL3V)
This three-day course is designed to provide students with MPLS-based Layer 3 virtual private network (VPN) knowledge and configuration examples. The course includes an overview of MPLS Layer 3 VPN concepts, scaling Layer 3 VPNs, Internet access, Interprovider L3VPNs, and Multicast for Layer 3 VPNs. This course also covers Junos operating system-specific implementations of Layer 3 VPNs. This course is based on the Junos OS Release 15.1R2.9.
Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos OS and in device operations.
After successfully completing this course, you should be able to:
- Describe the value of MPLS VPNs.
- Describe the differences between provider-provisioned VPNs and customer-provisioned VPNs.
- Describe the differences between Layer 2 VPNs and Layer 3 VPNs.
- List the provider-provisioned MPLS VPN features supported by the JUNOS software.
- Describe the roles of a CE device, PE router, and P router in a BGP Layer 3 VPN.
- Describe the format of the BGP routing information, including VPN-IP...
This course benefits individuals responsible for configuring and monitoring devices running the Junos OS.
Day 1
Chapter 1: Course Introduction
Chapter 2: MPLS VPNs
- MPLS VPNs
- Provider-Provisioned VPNs
Chapter 3: Layer 3 VPNs
- Layer 3 VPN Terminology
- VPN-IPv4 Address Structure
- Operational Characteristics
Chapter 4: Basic Layer 3 VPN Configuration
- Preliminary Steps
- PE Router Configuration
- Lab: Layer 3 VPN with Static and BGP Routing
Chapter 5: Layer 3 VPN Scaling and Internet Access
- Scaling Layer 3 VPNs
- Public Internet Access Options
- Lab: LDP over RSVP Tunnels a...
€0
Klassikaal
3 dagen
Programming for Network Engineers (PRNE)
The Programming for Network Engineers (PRNE) v2.0 course is designed to equip you with fundamental skills in Python programming. Through a combination of lectures and lab experience in simulated ne...
The Programming for Network Engineers (PRNE) v2.0 course is designed to equip you with fundamental skills in Python programming. Through a combination of lectures and lab experience in simulated network environments, you will learn to use Python basics to create useful and practical scripts with Netmiko to retrieve data and configure network devices. Upon completion of this course, you should have a basic understanding of Python, including the knowledge to create, apply, and troubleshoot simple network automation scripts.
This course will help you:
- Explain the need for network engineers to learn how to program
- Explain how programming relates to the journey into network automation and programmability
- Create useful and practical scripts to retrieve data and configure network devices
- Create, apply, and troubleshoot simple network automation scripts
- Gain hands-on experience with Python programming
After taking this course, you should be able to:
- Create a Python script
- Describe data types commonly used in Python coding
- Describe Python strings and their use cases
- Describe Python loops, conditionals, operators, and their purposes and use cases
- Describe Python classes, methods, functions, namespaces, and scopes
- Describe the options for Python data manipulation and storage
- Describe Python modules and packages, their uses, and their benefits
- Explain how to manipulate user...
This course is intended for:
- Network administrators
- Network engineers with little or no programming or Python experience
- Network managers
- Systems engineers
- Introducing Programmability and Python for Network Engineers
- Scripting with Python
- Examining Python Data Types
- Manipulating Strings
- Describing Conditionals, Loops, and Operators
- Exploring Classes, Methods, Functions, Namespaces, and Scopes
- Exploring Data Storage Options
- Exploring Python Modules and Packages
- Gathering and Validating User Input
- Analyzing Exceptions and Error Management
- Examining Debugging Methods
- Course Summary
€3.495
Klassikaal
4 dagen
ONTAP Cluster Administration (ONTAP9ADM)
Utrecht
ma 15 jun. 2026
en 6 andere data
ONTAP Cluster Administration (ONTAP9ADM)
In this course, you learn the basic administration tasks of a NetApp® ONTAP® 9.11 cluster. You use the clustershell and NetApp ONTAP System Manager to manage cluster storage and network resources. The course explains the configuration of basic data protection and data efficiency functions and common cluster maintenance tasks.
This course focuses on enabling you to do the following:
- Define ONTAP cluster components
- Describe the role of a storage VM (storage virtual machine, also known as SVM) in the NetApp storage architecture
- Configure an ONTAP cluster
- Configure and manage storage resources
- Configure and manage networking resources
- Create and configure a storage VM
- Create, manage, and protect NetApp FlexVol® volumes
- Implement storage efficiency features
- Manage ONTAP administrator access and user...
Systems administrator, cloud architect, operator, data protection specialist, enterprise architect, and integration engineer
Module 1: NetApp ONTAP 9 Clusters
- ONTAP deployment options
- The ONTAP cluster
- Storage VMs
- Software-defined storage
Module 2: Cluster Setup
- Supported ONTAP cluster configurations
- Setting up a Cluster
- Administration Interfaces
Module 3: Cluster Management
- Access control
- ONTAP licensing
- Policies and Schedules
Module 4: Network Management
- NetApp ONTAP Network Review
- Network Ports
- Network Traffic Segregation
- LIFs
- Nondisruptive LIF configuration
- Network secur...
€2.850
Klassikaal
3 dagen
ONTAP Data Protection Administration (DATAPROT9)
Utrecht
do 18 jun. 2026
en 6 andere data
ONTAP Data Protection Administration (DATAPROT9)
This intermediate-level course introduces key concepts and techniques for protecting data on NetApp® ONTAP® based systems. You learn about the data protection solutions that are integrated in ONTAP software. You also learn about tools for managing ONTAP data protection features. In the hands-on exercises, you use ONTAP System Manager and the ONTAP CLI to perform key data protection tasks. This course is updated for ONTAP 9.10.1 software.
This course focuses on enabling you to do the following:
- Describe and distinguish the data protection features in ONTAP software
- Administer the appropriate ONTAP data protection feature to address your data protection concern
- Configure NetApp SnapMirror® relationships for disaster recovery and data backup
- Demonstrate SVM DR
- Illustrate NDMP-enabled operations to back up NAS data to tape
- Integrate the cloud-based data protection solutions that complement your ONTAP based storage...
Customers, partners, and employees
Module 1: Overview of ONTAP data protection
- Data protection introduction
- ONTAP Data Protection Solutions
- ONTAP Management Solutions
Module 2: SnapMirror Fundamentals
- SnapMirror Overview
- Configuring SnapMirror Relationships
- Guidelines for Intercluster Networking
- Cluster and Storage VM Peering
Module 3: SnapMirror for disaster recovery and backup
- SnapMirror for FlexVol volumes
- SnapMirror configuration considerations
- Using SnapMirror for volumes
- Interaction betwee...
€1.900
Klassikaal
2 dagen
ONTAP Cluster Administration and Data Protection Bundle (CDOTDP9)
Utrecht
ma 15 jun. 2026
en 6 andere data
This 5 day course comprises the ONTAP Cluster Administration (ONTAP9ADM) followed by the 2 day ONTAP Data Protection Administration (DATAPROT9) courses.
The first 3 days uses lecture and hands-on...
This 5 day course comprises the ONTAP Cluster Administration (ONTAP9ADM) followed by the 2 day ONTAP Data Protection Administration (DATAPROT9) courses.
The first 3 days uses lecture and hands-on exercises to teach the basic administration tasks of an ONTAP 9.10 cluster. You use the cluster shell and OnCommand System Manager to manage storage and network resources. ONTAP Cluster Administration is an intermediate course in a comprehensive learning path for NetApp customers, partners and employees.
Students spend the final 2 days learning about the different data protection solutions that are integrated into ONTAP software, including the SyncMirror, SnapMirror, storage virtual machine (SVM) disaster recovery, and SnapVault solutions. The course also provides an overview of ONTAP MetroCluster configuration, NDMP, and cloud-based data protection with NetApp Cloud Volumes ONTAP and NetApp Data Availability Services. You also learn about the tools for managing ONTAP data protection features. In the hands-on exercises, you use NetApp OnCommand System Manager and the CLI to complete key data protection tasks.
The course also provides an overview of the ONTAP MetroCluster high-availab...
- Define ONTAP cluster components
- Describe the role of a storage VM (storage virtual machine, also known as SVM) in the NetApp storage architecture
- Configure an ONTAP cluster
- Configure and manage storage resources
- Configure and manage networking resources
- Create and configure a storage VM
- Create, manage, and protect NetApp FlexVol® volumes
- Implement storage efficiency features
- Manage ONTAP administrator access and user accounts
- Maintain NetApp storage systems
- Describe and...
- Network Engineers
- Channel Partners
- System Engineers
- NetApp Customers
ONTAP9ADM:
Module 1: NetApp ONTAP 9 Clusters
- ONTAP deployment options
- The ONTAP cluster
- Storage VMs
- Software-defined storage
Module 2: Cluster Setup
- Supported ONTAP cluster configurations
- Setting up a Cluster
- Administration Interfaces
Module 3: Cluster Management
- Access control
- ONTAP licensing
- Policies and Schedules
Module 4: Network Management
- NetApp ONTAP Network Review
- Network Ports
- Network Traffic Segregation
- LIFs
- Nondisruptive LIF configuration...
€4.750
Klassikaal
5 dagen
Implementing Segment Routing on Cisco IOS XR (SEGRTE201)
The Implementing Segment Routing on Cisco IOS XR (SEGRTE201) v2.0 course covers the fundamental concepts of Segment Routing (SR), how to configure and verify segment routing within an Interior Gate...
The Implementing Segment Routing on Cisco IOS XR (SEGRTE201) v2.0 course covers the fundamental concepts of Segment Routing (SR), how to configure and verify segment routing within an Interior Gateway Protocol (IGP), and the interworking of Label Distribution Protocol (LDP) with segment routing. You will learn how to implement Topology-Independent Loop-Free Alternate (TI-LFA) using segment routing, and how to instantiate and verify segment routing traffic engineering policies. You will also learn how to implement segment routing within Border Gateway Protocol (BGP).
How you'll benefit
This course will help you:
- Learn how to configure and verify segment routing within an Interior Gateway Protocol (IGP)
- Prepare to implement topology-independent loop-free alternate using segment routing
- Learn to implement segment routing within Border Gateway Protocol
After taking this course, you should be able to:
- Describe the key concepts of segment routing
- Implement and verify IGP segment routing
- Migrate an existing Multiprotocol Label Switching (MPLS) LDP-based network to segment routing
- Implement and verify TI-LFA segment routing
- Instantiate segment routing policies
- Instantiate multidomain segment routing policies
- Configure and verify BGP prefix segments and SR-based services
- Systems engineers
- Network engineers
- Field engineers
- Technical support personnel
- Channel partners and resellers
- Introduction to Segment Routing
- IGP Segment Routing Implementation and Verification
- Segment Routing and LDP Interworking
- Topology Independent – Loop Free Alternate
- Segment Routing Policies – Traffic Engineering (SR-TE)
- Multidomain SR Policies
- BGP Prefix Segment and Egress Peer Engineering
€0
Klassikaal
4 dagen
z/OS JCL and Utilities (ES07G)
z/OS JCL and Utilities (ES07G)
This course is designed to teach you how to use z/OS job control language (JCL) and selected z/OS utility programs in an online batch environment. Both Storage Management Subsystem (SMS) and non-SMS JCL are discussed. Machine lab exercises complement the lecture material.
- Code basic JCL statements using proper syntax and coding rules, including JCL for:
- Creating new data sets
- Referencing existing data sets
- Condition code testing
- IF/THEN/ELSE/ENDIF constructs
- Generation data groups
- Output routing
- JCL enhancements introduced by various releases of Multiple Virtual Storage (MVS), OS/390, and z/OS
- Identify Storage Management Subsystem requirements
- Code instream and cataloged procedures
- Use symbolic parameters in procedures
- Code procedure ov...
This basic course is intended for people who want to use z/OS JCL and utilities.
- Introduction to JCL
€0
Klassikaal
5 dagen
Basics of z/OS RACF Administration (ES19G)
Basics of z/OS RACF Administration (ES19G)
This course begins with an introduction to the z/OS environment, TSO and ISPF/PDF, batch processing, and z/OS data sets. Hands-on labs allow you to gain experience with viewing and allocating data sets, submitting a batch job, and viewing job output. After the introduction to z/OS, you will then learn, through lecture and exercises, how to use basic RACF command parameters and panels to define users and groups, protect general resources, z/OS data sets, and choose a basic set of RACF options.
- Understand the basic features and concepts of zSeries architecture and of the z/OS operating system as they relate to security administration
- Describe the allocation process for data sets in the z/OS environment
- Identify the security requirements of a system
- Use the basic facilities and features of RACF
- Define users to RACF
- Set up a RACF group structure
- Use RACF to protect resources
- Select a base set of options to tailor RACF
This basic course is for those who are new to z/OS and the RACF and responsible for security administration using the RACF element of the z/OS Security Server. Those who need to implement some of the more advanced features of the RACF might want to attend one or more of the following courses:
- Effective RACF Administration (BE87G)
- Implementing RACF Security for CICS (ES84G)
- Exploiting the Advanced Features of RACF (ES88G)
Day 1
- Welcome
- Unit 1: Review of z/Architecture and z/OS
- Unit 2: An introduction to ISPF and ISPF/PDF
- Exercise 1: Logging on to the lab system
- Unit 3: An introduction to z/OS data sets
- Exercise 2: Working with z/OS data sets
- Unit 4: Batch processing
- Exercise 3: Job submit and SDSF view Exercise review
- Unit 5: Security and RACF overview (part 1)
Day 2
- Unit 5: Security and RACF overview (part 2)
- Unit 6: Administering groups and users (section 6.1)
- Exercise 4 (includin...
€0
Klassikaal
5 dagen